Searching…
Rome Airport stands for the busiest airport in Italy and the main international airport serving the city of Rome. It consists of four passenger terminals, although nowadays only Terminal 1 and Terminal 3 are operative.
Terminal 3: Domestic, Schengen, and non-Schengen flights operated by the remaining airlines.
Rome Leonardo da Vinci Airport is spread over two terminals. Terminal 1 has been expanded, taking over the old terminal 2, and terminal 3 is the biggest Fiumicino airport terminal.
Three of the terminal buildings at Rome Airport — Terminals 1 through 3 — have direct connections between themselves so you can simply walk to get from one terminal to another. Note however that Terminal 2 is permanen...
FCO Airport consists of two main passenger terminals: Terminal 1 and Terminal 3. Terminal 1 is primarily used by ITA Airways and hosts Gates A1 through A83. Terminal 3 is the larger of the two and serves as a hub for ...
Learning the exact airline–terminal pairing at Leonardo da Vinci–Fiumicino Airport (FCO) saves time on the ground. Below is an A–Z roll of airlines and their current primary terminal in Rome, so you know where to chec...
At Fiumicino you will find two terminals (1 and 3), which are connected in a single building, and you can move between them inside the public and transit section.
Navigate Fiumicino Airport (FCO) airport with detailed terminal maps, gate locations, airlines, and transportation information. Complete guide to Rome airport terminals and services.
Rome Fiumicino Airport: Terminal and gate map The airport consists of two terminals. They are named Terminal 1 and Terminal 3. Terminal 1 (Gates A1-A83) has its own pickup and drop-off area. Inside the main entrance i...
The Leonardo Da Vinci airport in Rome has 4 terminals, being all close together, it will be easy to walk from one to the other. It is therefore not necessary to take a bus to move from one terminal to another.
