Searching…
Add a Touch of SPice™ Selected SPLat controllers are designed to accept one SPice board at a time. The Touch of SPice concept provides for a range of small, generally simply but very useful add-on …
SPice 10200: Programming Once installed on a SPLat controller, the SPice10200 appears as several regular analog and digital I/O points. The following table shows the mappings for all the I/O on the …
The SPice10205 is a low cost add-on for SPLat programmable OEM controllers. It provides for 6 levels of water level sensors. It is ideal for pump control panels, tank level control and other applications …
Tutorial: Using SPiceX for large I/O counts This tutorial will teach you how to control a large number of XPice expansion boards like the XBIO16 and XIRO16. This will allow you to configure SPLat control …
Our standard off-the shelf controllers offer a range of features making them an attractive alternative to programmable logic controllers in embedded OEM applications. All current products are …
Product documentation: SPice add-on boards SPice (or Touch of SPice) boards are small add-on boards that can be added "piggy back" to the SPice connector on a SPLat controller board. The …
SPice 10205: Introduction The SPice 10205 is an add-on board for SPLat controllers that provides six channels of fluid level switching. The fluid level sensing works on the principle of detecting an electric …
It has the advantage of very simple hardware, but on the downside it will not provide on-screen simulation of those I/Os, and programming will be less convenient than the basic built in I/O. There is …
If you are using an MMi controller, remove the two option links Identify the single in-line female strip connector on the back side (non-component side) of the SPice board. Identify the matching single in …
The SPice10211 is a Touch of SPice board. This is the name applied to one of the several expansion systems supported within the SPLat Expansion Framework. The board may be used with …
